Technical Snapshot

The WD Red SA500 2TB SATA M.2 SSD is a high-performance M.2 2280 solid state drive built with TLC flash and a SATA III 6Gb/s interface. It delivers sequential read speeds Up to 560 MB/s and sequential write speeds Up to 530 MB/s. Random I/O reaches 95,000 read IOPS and 85,000 write IOPS. The drive offers 2TB of storage, an endurance rating of 1,300 TBW, a 2,000,000 hours MTBF, backed by a 5 years warranty. Part of WD's Red SA500 product line, this drive targets enthusiast gamers, content creators, and workstation builders requiring high-bandwidth NVMe storage.

Use Case
General-purpose storage, everyday computing
Compatibility
M.2 2280 slot, SATA III 6Gb/s-capable motherboard
Category
Internal NVMe SSD — WD Red SA500
WD Red SA500

Red SA500 2TB SATA M.2 SSD

SATA III 6Gb/s · M.2 2280 · TLC · Up to 560 MB/s Read

Total usable storage capacity of the drive.
Capacity 2TB
Maximum sequential read speed under optimal conditions.
Seq Read Up to 560 MB/s
Maximum sequential write speed under optimal conditions.
Seq Write Up to 530 MB/s
Total terabytes that can be written over the drive's lifetime before expected wear-out.
Endurance 1,300 TBW
MPNWDS200T1R0B
CategorySolid State Drives
Contact for Price
Comparing SSDs? Open Comparison Tool →

Performance & Interface

Form FactorM.2 2280
InterfaceSATA III 6Gb/s
Sequential ReadUp to 560 MB/s
Sequential WriteUp to 530 MB/s
Random Read IOPS95,000
Random Write IOPS85,000
NAND TypeTLC
Endurance (TBW)1,300 TBW
MTBF2,000,000 hours
Warranty5 years

Full Specifications

Data sourced from WD product specifications
Storage
Product LineRed SA500
Capacity2TB
Form FactorM.2 2280
InterfaceSATA III 6Gb/s
NAND TypeTLC
Performance
Sequential ReadUp to 560 MB/s
Sequential WriteUp to 530 MB/s
Random Read IOPS95,000
Random Write IOPS85,000
Endurance & Reliability
Endurance (TBW)1,300 TBW
MTBF2,000,000 hours
Warranty5 years
Product
BrandWD
MPNWDS200T1R0B
VariantM.2
Physical
Weight0.010 kg (estimated)
Package Dimensions10.0 x 8.0 x 1.0 cm (estimated)

Support & Downloads

WD Red SA500 2TB SATA M.2 SSD Firmware UpdateLatest firmware · Check WD support
WD Support →
WD Red SA500 2TB SATA M.2 SSD DatasheetPDF · Technical specifications
WD Support →
← Back to WD SSD Catalog

Frequently Asked Questions

Is the WD Red SA500 2TB SATA M.2 compatible with my motherboard?

The WD Red SA500 2TB SATA M.2 SSD uses a M.2 2280 form factor with SATA III 6Gb/s interface. It is compatible with any motherboard that has a matching M.2 2280 slot. Check your motherboard specifications for SATA port availability.

Can I use the WD Red SA500 2TB SATA M.2 in a laptop?

Yes, if your laptop has an M.2 2280 NVMe slot. Some laptops use shorter M.2 2230 or M.2 2242 form factors — the WD Red SA500 2TB SATA M.2 SSD requires the standard 2280 (80mm) length slot.

What is the endurance rating of the WD Red SA500 2TB SATA M.2?

The WD Red SA500 2TB SATA M.2 SSD is rated for 1,300 TBW with a 2,000,000 hours MTBF, backed by a 5 years warranty. At typical consumer usage of ~50 GB/day, this provides years of reliable operation.

How fast is the WD Red SA500 2TB SATA M.2?

The WD Red SA500 2TB SATA M.2 SSD delivers Up to 560 MB/s sequential read and Up to 530 MB/s sequential write speeds. Random I/O performance: 95,000 read IOPS and 85,000 write IOPS.

What type of NAND does the WD Red SA500 2TB SATA M.2 use?

The WD Red SA500 2TB SATA M.2 SSD uses TLC flash memory with 2TB storage capacity. TLC NAND offers a good balance of performance, endurance, and cost.

JSON-LD Structured Data — Product + FAQ + Breadcrumb
Product: WD Red SA500 2TB SATA M.2 SSD
MPN: WDS200T1R0B
Schemas: Product + BreadcrumbList + FAQPage
Properties: 12 additionalProperty entries
Related: 5 isRelatedTo links